Call : +918068341783
Home » Products » Concrete Lining Paver » Concrete Lining Paver

Concrete Lining Paver

Concrete Lining Paver
Concrete Lining Paver
Send Inquiry
Product Code : 05
Price And Quantity
  • Minimum Order Quantity
  • 1 Unit/Units
  • Price Range
  • 2700000.00 - 60000000.00 INR
Product Specifications
  • Material
  • Steel
  • Type
  • Construction Hoist
  • Computerized
  • Yes
  • Automatic
  • Yes
  • Color
  • Gray
Product Description

We are a renowned exporter, manufacturer and supplier of Concrete Lining Paver, we have carved a niche in the market. Offered plant has been produced by utilizing standard quality parts in our well equipped production plant. This plant is used for the construction of airport, canal, bridges, reservoir, flooring and runway roads. Frames of the offered equipment is accessible in different length based options that include  1830 mm, 1220 mm, 3600 mm and 2440 mm. Offered Concrete Lining Paver equipment is used for maintaining required thickness of applied concrete surface.

Features of Concrete Lining Paver:

Rigid body
Used for different construction projects for developing canal, airport and road
High speed operation
Uniform surface of applied concrete layer

Other Information:

This machine consists of hydraulically controlled two power packed parts. One of these components is located at the console section and the other part is attached to its undercarriage section. All its units are equipped with electricity driven motors. Custom made downright frame of this machine is tilted toward its four mechanical jacks (fixed type). All these four jacks are attached with two rollers in a special manner for denoting movement of four bogies on rail.

The console consists of power pack and electric motor of 10 hp capacity. It is located in one of the ends from where the operator can control mechanism of drum bogie and can adjust its operating speed. Undercarriage of this equipment comprises of electric motor of 15 hp capacity for managing vibration level of drum and groove cutter.
Provided Concrete Lining Paver is used to maintain uniformity of concrete surface by adjusting its thickness level.
Expansion joint of concrete surface is developed by following two different methods. PVC inserter is utilized longitudinally in transverse manner or hydraulic motor controlled groove cutter is used in same direction for this purpose.


Wooden planks and pipes have been used to design wheeled structure of this work bridge. This system is also used for varnishing job by maintaining longitudinal and transverse direction.

Technical Specifications | Main Structure:

  • Bolt fitted section frame of this equipment is available in different length based options that include 3660 mm, 1220 mm, 600 mm and 2440 mm.
  • Maximum 30 meter of finishing width
  • Frame can be adjusted more than 20 mtr (MLP-1200), up to 20 mtr (MLP-750) and maximum 15 mtr (MLP-600).
  • Equipped with four height adjustment jacks 

Under Carriage:

  • This section consists of vibration motor controlled vibratory finishing drum
  • Length and diameter of each drum is 1200 mm and 270 mm respectively
  • Lengthy screw auger that has hardened surface
  • ±3 mm finishing tolerance in 4 mtr

Motion System:

  • Electrically powered eight bogie wheels and each bogie has two wheels
  • For two housing, there is single drive on any one side
  • Up to 25 rpm operating speed
  • Control System:
  • Equipped with variable frequency drive for trouble free traveling of under carriage
  • Electrical panel board
Trade Information
  • Supply Ability
  • 2 Per Week
  • Delivery Time
  • 2 Week


Back to top
MAXMECH EQUIPMENTS PVT. LTD. All Rights Reserved.(Terms of Use)
Developed and Managed by Infocom Network Ltd.